Introduction JL-1608ABS plastic bonding glue compliance with international environmental standards, and has been adopted by the EU ROHS SGS testing standards for vinyl polymer as the main-component solvent ABS, AS special adhesive. Features easy to use, fast positioning, high-heeled plastic stick adhesive strength as a whole, the cured non-toxic and so on. After work waterproof adhesive, heat, cold, oil, corrosion resistance and ABS plastic itself, ABS special glue for the current bond ABS, the best types of plastic AS plastics. Scope widely used in handicrafts, toys, electronic products plastic shell, a fish, bait, such as ABS, AS plastic bonding and repair. Performance Appearance: colorless, transparent glue non-volatile matter: 9 ± 1% Viscosity: 500-1500 Cps Shear: ABS-ABS≥50kg / c㎡ use method 1, to the bonding surface treatment: sticky surface cleaning to ensure that the surface is sticky dry, no oil, no dust. In the dry, oil-free single or double-sided adhesive bonding surface, immediately bonded (no dry adhesion), beat it in close contact. 2, it is best to use a plastic syringe, because the glue relatively thin, and relatively fast curing, painted with a brush coated with glue, then glue afraid uneven pressed immediately after injection with a syringe glue. The two adhesive surface exactly. 5 minutes to locate, 2-3 hours there is a considerable strength, up to the maximum strength after 24 hours. Notes 1, when using this product, the operating site must be well ventilated and operate in accordance with national regulations concerning the protection of labor. 2, this product is flammable chemicals, please stay away from children, fire, heat, temperature and shade airtight storage, is prohibited and oxidants, acids, alkalis mix chemicals, avoid prolonged exposure to uncured rubber skin. 3, the available amount of ethyl acetate diluted, stir to use. 4, if accidentally splashed into the eyes, rinse immediately with plenty of water and seek treatment. 5, attention to ventilation and prevent fire contact use. 6, after use should be kept covered to avoid solvent evaporation, such as glue is too thick, use ABS glue special diluent. Packing 15KG / drum. 20kg / plastic barrel shelf life of six months, expired after passing the test, you can continue to use storage products should be sealed in a ventilated, cool, dry place.